PI 20W-50

PI 20W-50

Superior Quality Multi-Grade Oil for Aviation Piston Engines

Description:

Peravia PI 20W-50 has an engine oil developed for very-light and ultra-light aviation piston engines such as Lycoming, Continental, Pratt & Whitney. This product is an ash-free             semi-synthetic multi-grade oil that offers excellent dispersion qualities. This engine oil has formulated for use under very severe conditions and throughout the year in any climate.

Main Applications:

Peravia PI 20W-50 has designed to meet the requirements of modern aircraft piston engines used in commercial, military and private aircraft piston engines. It helps to protect low usage engines and engines in high humidity climates against rust and corrosion of critical engine parts such as camshafts and lifters.

Peravia PI 20W-50 is also recommended for Pratt & Whitney, Teledyne Continental Motors and Textron Lycoming engines.

Caution:

Peravia PI 20W-50 already contains, in the correct proportions, an anti-wear additive, the same as TEXTRON Lycoming additive LW 16702: by using the product, it is not necessary to add this additive in the oil.

 

Specification: 

 – SAE J-1899

 – MIL-L-22851D (Quality Guarantee)

 – Pratt and Whitney Spec. No. 1183

 – Teledyne Continental Motors MHS 24A, SIL 99-2

 – Textron Lycoming Spec. No. 301F

 – NATO Code: 0-162 (Quality Guarantee)

  

Advantages:

•  Enhanced wear protection and corrosion protection
•  High oxidation and thermal stability
•  Exceptional low temperature performance
•  Excellent dispersing performance for reducing the build of varnish and sludge
•  Low oil consumption for less frequent top-up

Health and Safety:

•  Do not use as medicine or food product.
•  If swallowed, get medical assistance. If medical assistance is not immediately available, induce vomiting.
•  After handling wash thoroughly and immediately with soap and water. Launder oily clothing before reuse.
•  Discard oil-soaked shoes or boots.

 

Characteristics:

Result	Test Method	Typical  Characteristics
20W-50	–	SAE Grade
176.2 19.1	ASTM D445	Kinematic Viscosity, cSt @ 40 °C @ 100 °C
125	ASTM D2270	Viscosity Index
889	ASTM D4052	Density @ 15, kg/m3
228	ASTM D92	Flash Point COC, ˚C
-27	ASTM D97	Pour Point, ˚C
0.25	ASTM D664	TAN, mg KOH/g
8700	ASTM D5293	CCS @ -15 ºC, cP
45000	ASTM D4684	MRV @ -20 ºC, cP
10/0 20/0 10/0	ASTM D892	Foam, ml/ml               ● Seq. I               ● Seq. II               ● Seq. III
< 0.005	ASTM D874	Sulfated Ash, %
4.5	ASTM D5800	Noack, %
0.49	ASTM D4172B	Four-ball Wear, Scar mm

Notes: These characteristics are Typical of current production. Whilst future production will confirm to the company’s specification, variations in these characteristics may occur.