JET SP3

Peravia Jet SP 3     

Petroleum Aviation Turbine Oil

Description:

Peravia Jet SP 3 has a petroleum base with a mixture of high-performance additives. The resulting product has far superior thermal and oxidation stability than mineral-oil-based lubricants. The closely controlled viscosity of Peravia Jet SP 3 at -40º C, along with a -60ºC pour point, ensure good low-temperature fluidity, permitting engine starting and lubrication at low temperatures.

Main Applications:

Peravia Jet SP 3 is used in gas-turbine aircraft engines with outlet temperature of oil up to 150°C (civil aircraft II-62, Il-76, Il-86, Tu-134, Tu-154 and Yak-40, military aircraft MiG-21, Su-15 and Su-25, helicopters Mi-6 and Mi-7). It is used in oil compounds in turboprop engines (An-12,    An-30, An-32 and Il-18), and for preserving aero engine lubrication systems. Besides, it is used in marine (ship), gas-compressor plant and power plant gas-turbine engines.

Specification:

 – MS-8P, MS-8RK

 – B3V and LZ-240

 – IMP-10

 – VNII NP 50-1-4f and-4u

 – 36/1 Ku-A

 

Advantages:

•  Outstanding low-temperature properties
•  Improving bulk oil oxidation stability and extended oil drain intervals
•  Excellent anti- rust and anti- corrosion properties
•  Reducing sludge and carbon deposits
•  Good foam resistance
•  Excellent wear protection
•  Good resistance to evaporation
•  Does not contain zinc or other heavy metals

Health and Safety:

•  Do not use as medicine or food product.
•  If swallowed, get medical assistance. If medical assistance is not immediately available, induce vomiting.
•  After handling wash thoroughly and immediately with soap and water. Launder oily clothing before reuse.
•  Discard oil-soaked shoes or boots.

 

Characteristics:

Result	Test Method	Typical  Characteristics
<1.0	ASTMD1500	Color
11.4 8.25 3320	ASTM D445	Kinematic Viscosity, cSt @ 40 °C @ 50 °C @ -40 °C
858	ASTM D4052	Density @ 15, kg/m3
162	ASTM D92	Flash Point, ˚C
-60	ASTM D97	Pour Point, ˚C
0.07	ASTM D664	TAN, mg KOH/g
40/0 20/0 40/0	ASTM D892	Foam               ● Seq. I               ● Seq. II               ● Seq. III
1b	ASTM D130	Copper Corrosion
0.44	ASTM D4172 Modified	Four ball Wear, Scar mm 20 kg, 1 h, 1500 rpm, 54 ˚C
40	ASTM D6304	Water Content, ppm
Pass	ASTM D665A,B	Rusting Preventing Characteristics
8.70 0.19	ASTM D4636	Thermal Stability and Corrosivity 50 h at 150 °C Viscosity Change at 50 °C, % Acid Number Change, mg KOH/g

Notes: These characteristics are Typical of current production. Variations in these characteristics may occur