HF 310

Peravia Jet HF 310

Fire-Resistant Synthetic Fluid for Aviation Hydraulic

 

Description:

Peravia Jet HF 310 is a synthetic hydrocarbon hydraulic fluid for aircraft, ordnance, and industrial use. This unique formulation uses the most advanced additive technology providing excellent viscosity-temperature properties, outstanding anti-wear, anti-corrosion and oxidation protection and complete shear stability. It has a high flash and fire point, exceptionally high auto
ignition point, and very low flame propagation.

Main Applications: 

Peravia Jet HF 310 is especially recommended for use in aircraft, missile, shock absorbers, brakes and ordnance systems using synthetic sealing material as well as heavy-duty construction equipment, and industrial robotic hydraulic systems. It is intended for use in extreme conditions over a wide range of operating temperatures from -40 °C to 205 °C.

Caution: This product is incompatible with natural rubber elastomers. Its fire resistant properties will be reduced if the product is intermixed with petroleum based fluids.

 

Specification:

 – MIL-PRF-83282D

 – NATO H-537

 –  DCSEA 437/B

 – OX-19

 

Advantages: 

•  Outstanding low-temperature properties
•  Resists deposit formation and viscosity increase due to oxidation
•  Excellent anti- rust and anti- corrosion properties
•  Good foam resistance
•  Excellent wear protection
•  Does not contain zinc or other heavy metals

Health and Safety:

•  Do not use as medicine or food product.
•  If swallowed, get medical assistance. If medical assistance is not immediately available, induce vomiting.
•  After handling wash thoroughly and immediately with soap and water. Launder oily clothing before reuse.
•  Discard oil-soaked shoes or boots.

Characteristics:

Result	Test Method	Typical  Characteristics
Red	Visual	Color
14.5 3.61 2170	ASTM D445	Kinematic Viscosity, cSt @ 40 °C @ 100 °C @ -40 °C
855	ASTM D4052	Density @ 15, kg/m3
210	ASTM D92	Flash Point, ˚C
248	ASTM D92	Fire Point, ˚C
-60	ASTM D97	Pour Point, ˚C
0.06	ASTM D664	TAN, mg KOH/g
5	SAE AS4059	Particle Counter
50/0	ASTM D892	Foam               ● Seq. I
1b	ASTM D130	Copper Corrosion
12.9	ASTM D972	Evaporation Loss, 6.5 h, 150 °C, %m
0.48	ASTM D4172B	Four ball Wear, Scar mm
65	ASTM D6304	Water Content, ppm
Pass	ASTM D665A	Rusting Preventing Characteristics
25.0	ASTM D4289	Elastomer Compatibility @ 70 °C, 168 h NBR-L

Notes: These characteristics are Typical of current production. Variations in these characteristics may occur