PI W120

Peravia PI W120

 Superior Quality Oil for Aviation Piston Engines

Description:

Peravia PI W120 has an engine oil developed for very-light and ultra-light aviation piston engines such as Lycoming, Continental, Pratt & Whitney. This product is an ash-free semi-synthetic oil that offers excellent dispersion qualities. This engine oil has formulated for use under very severe conditions and throughout the year in any climate.

Main Applications:

Peravia PI W120 has designed to meet the requirements of modern aircraft piston engines used in commercial, military and private aircraft piston engines. It helps to protect low usage engines and engines in high humidity climates against rust and corrosion of critical engine parts such as camshafts and lifters.

Peravia PI W120 is also recommended for Pratt & Whitney, Teledyne Continental Motors and Textron Lycoming engines.

Caution:

Peravia PI W120 already contains, in the correct proportions, an anti-wear additive, the same as TEXTRON Lycoming additive LW 16702: by using the product, it is not necessary to add this additive in the oil.

 

Specification:

 – SAE J-1899

 – MIL-L-22851D (Quality Guarantee)

 – Pratt and Whitney Spec. No. 1183

 – Teledyne Continental Motors MHS 24B

 – Textron Lycoming Spec. No. 301F

 – Russian MS-14

  

Advantages: 

•  Enhanced wear protection and corrosion protection
•  High oxidation and thermal stability
•  Exceptional low temperature performance
•  Excellent dispersing performance for reducing the build of varnish and sludge
•  Low oil consumption for less frequent top-up

Health and Safety:

•  Do not use as medicine or food product.
•  If swallowed, get medical assistance. If medical assistance is not immediately available, induce vomiting.
•  After handling wash thoroughly and immediately with soap and water. Launder oily clothing before reuse.
•  Discard oil-soaked shoes or boots.

 

Characteristics:

Result	Test Method	Typical  Characteristics
60	–	SAE Grade
304 23.5	ASTM D445	Kinematic Viscosity, cSt @ 40 °C @ 100 °C
98	ASTM D2270	Viscosity Index
890	ASTM D4052	Density @ 15, kg/m3
260	ASTM D92	Flash Point COC, ˚C
-24	ASTM D97	Pour Point, ˚C
0.09	ASTM D664	TAN, mg KOH/g
20/0 20/0 20/0	ASTM D892	Foam, ml/ml               ● Seq. I               ● Seq. II               ● Seq. III
< 0.005	ASTM D874	Sulfated Ash, %
0 0.5 0 0 0 4 0 0 0		Elemental Analysis, ppm                                 Cu                                 Zn                                 Ca                                 Mg                                 Mo                                 Si                                 Sn                                 Al                                 Fe

Notes: These characteristics are Typical of current production. Whilst future production will confirm to the company’s specification, variations in these characteristics may occur.