HF 510

Jet HF 510

Mineral Oil for Aviation Hydraulic

Description:

Peravia Jet HF 510 is designed for aircraft systems where use of hydrocarbon-based hydraulic fluids is required. It is ashless (Zinc-free) antiwear hydraulic fluid, low viscosity product, high viscosity index fluid with excellent low temperature properties, and good chemical stability. This provides excellent wear protection for hydraulic pumps and motors, protect hydraulic system components against rust and corrosion, and is resistant to excessive foam buildup that can cause poor or sluggish hydraulic system response.

Main Applications:

Peravia Jet HF 510 meets the cleanliness requirements for “super clean” hydraulic fluid for use in modern aircraft hydraulic systems. It is recommended for use in non-pressurized systems operating between -54°C and 90°C (-65°F to 194°F), and in pressurized systems operating between -54°C and 135°C (-65°F to 275°F) at pressures up to 3,000 psi. This product also applies for aircraft and missile control systems, autopilots, shock absorbers, auto wreckers, boom trucks, electrical service equipment (cherry pickers) and industrial robotics.

Caution: Peravia Jet HF 510 do not use these fluids in hydraulic systems with natural rubber elastomers.

Specification:

– MIL-PRF-5606J

– NATO H-515

– DEF STAN 91-48/1, super clean grade

– GOST 6794-75

Advantages:

Outstanding low-temperature properties
Very high viscosity index for use over a wide temperature range
Resists deposit formation and viscosity increase due to oxidation
Excellent anti- rust and anti- corrosion properties
Good foam resistance
Excellent wear protection
Does not contain zinc or other heavy metals

Health and Safety:

Do not use as medicine or food product.
If swallowed, get medical assistance. If medical assistance is not immediately available, induce vomiting.
After handling wash thoroughly and immediately with soap and water. Launder oily clothing before reuse.
Discard oil-soaked shoes or boots.

Characteristics:

Result	Test Method	Typical Characteristics
Red	Visual	Color
14.22 5.11 525 2350	ASTM D445	Kinematic Viscosity, cSt @ 40 °C @ 100 °C @ -40 °C @ -54 °C
870	ASTM D4052	Density @ 15, kg/m³
92	ASTM D93	Flash Point, Closed Cup, ˚C
-60	ASTM D97	Pour Point, ˚C
0.08	ASTM D664	TAN, mg KOH/g
5	SAE AS4059	Particle Counter
50/0 30/0 50/0	ASTM D892	Foam ● Seq. I ● Seq. II ● Seq. III
1b	ASTM D130	Copper Corrosion
16.1	ASTM D972	Evaporation Loss, 6 h, 71 °C, %m
0.7	ASTM D4172B	Four ball Wear, Scar mm
80	ASTM D6304	Water Content, ppm
Pass	ASTM D665A	Rusting Preventing Characteristics
23.0	ASTM D4289	Elastomer Compatibility @ 70 °C, 168 h NBR-L